Showing 81–100 of 163 results
The Duotight Inline Regulator – these compact inline regulators have been designed to suit 8mm (5/16″) tubing. Suits pressures 0-150psi however this unit is packed with the 0-60psi gauge as standard. Suitable for mains water pressure, also suitable for liquid or gas. – Made from Acetal/POM, EPDM o-rings and stainless teeth – Suits 8mm (5/16)…
Please Note: This is not a replacement thermowell bulkhead for the 60cm Thermowell. This fitting is designed to stop the hose from being pushed in all the way. Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing…
This duotight push fit fitting is 8mm (5/16″) Female to Female. The bulkhead with locknut is designed to go through the wall of a tank, housing or wall or panel. Simply fit to wall/panel/vessel and push tube in from both sides to join.These high quality acetal fittings are made with EPDM o-rings that are reliable,…
This straight MFL joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm ID x 9.5mm OD line or most lines with 9.5mm outer diameter. The FFL x 9.5mm duotight is suited to those who prefer to have their gas line a different thickness so that it can be easily identified in a…
Duotight – 8mm (5/16) Filter (100 mesh). This filter strainer (100 Micron) is designed to remove larger particles easily and efficiently which helps protect your brewing equipment to home inline water filters.This can also be used as a light-duty keg to keg hop filter. Ensure you have cold crashed efficiently prior to use and sanitised….
This manifold splits one line into two, each with a check valve. The check valve can also be removed if you want gas or water to move freely in both directions. If you want to cap off certain lines, we would recommend using the Duotight – 8mm (5/16′) Plug Using a thin flat headed screw…
If you want an easy way to balance your beer lines this is the way to do it. Please be aware that even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional…
This really handy device is great for filling kegs, keg to keg transfers or fermenter to keg transfer – great for use with Fermzilla or other pressure fermenters. Simply attach this device to the output gas post of your keg then when the keg is full it will prevent further liquid exiting the gas post….
Made exclusively for the Duotight manifolds and gen 3.0 Duotight 8mm fittings to be mounted to a flat surface. These can swivel around if you need to mount on a particular angle once stuck down.They can also easily be removed from the 8mm Duotight side as they simply click/clamp in to each other. If you…
The Complete Kegging Companion Seal Kit There is nothing worse that having all your beer ready to go but you are just missing that one o-ring seal. This kit will probably save the day. This kit contains almost everything you need to refurbish your Cornelius/19L home brew ball lock kegs. The kit also includes the…
Our new Freedom One Sodastream Adapter MKII – Does not have a quick disconnect feature. This has been removed to reduce the likelihood of the quick disconnects two washer seal design dislodging and blocking the hose rendering it unusable. Please Note: This does not come with a CO2 Bottle, Or the SodaStream unit itself.
This is a fantastic way to make a CO2/Nitrogen gas board so you can control, monitor and display the different pressures to a multi-keg draft system. These food grade, polypropylene regulator gas boards allow you to mount your mini inline regulators to your wall so you can supply gas to various kegs at different pressures….
The Growler Filler Spout extension can be used on any of the Nukatap beer taps. It is also compatible with Intertap taps. The spout has a 13mm barb which you can attach some hose so you can fill your growler from the bottom up to minimise foaming. Simply un-screw the regular nozzle and screw on…
Lubri-film Plus is a sanitary non toxic, Odourless and tasteless lubrication formula. It is great for moving parts that come in contact with your brew such as disconnects / O-rings etc. A little goes a long way. Keep your gear in tip top shape with this keg lube that will last you for years as…
Chrome plated brass Hex Nut, often used for attaching a tail piece to a shank. From: Krome Dispense
This particular type of k-lok fitting is to go onto the gas and liquid sides of standard 5/8 keg couplers. So this will fit our KL08822 D-Type Coupler, KL08839 S-type Coupler and KL08815 A-Type Coupler . The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock) and other brands of draft beer quick…
This fitting is typically used on the end of the liquid line that attaches to the keg couplers. This fitting has a check valve built in. This check valve prevents liquid from draining out of your beer line when it’s disconnected so it’s a dry break.
Duotight 8mm x Ball Lock Disconnect (Black + Yellow/Liquid) This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably – no need for additional fittings or clamps. It is a robust and super compact design that is incredibly…
Beer (black) barbed connector for ball lock corny kegs. Also called a disconnect. This is a premium plastic ball lock connector, with a two year warranty. These high quality plastic disconnects are designed with the highest tolerances and quality control standards. These can be easily distinguished by the two toned cap on top of the…
Duotight 8mm x Ball Lock Disconnect (Black + Yellow/Liquid) This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably – no need for additional fittings or clamps. It is a robust and super compact design that is incredibly…