Showing 1–20 of 163 results
Made from 304 Grade Stainless Steel In the beer dispensing industry the 5/8″ BSP thread is widely used throughout all fittings such as keg couplers, beer tap shanks and many other fittings. With that said, 5/8″ BSP threads are rarely used elsewhere so this adaptor changes the 5/8 inch thread to the common 1/2″ BSP…
These ball valves include a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another The manifolds we sell all come standard with 2, 4 or 6 output. These can be converted to 3, 5, or 7 output by simply unscrewing the 1/4…
These long shanks are suitable to attach taps to a Jockey Box (esky) or Fridge/Freezer wall. You will need a 22mm Size Holesaw in order to get a snug fit. Also Compatible with: Perlick, Brumby, Micromatic + many more. They come with:– 100mm Stainless 304 NukaTap Shank– duotight 8mm push in to 5/8″ female thread–…
A stainless steel shank for your beer tap, with a bore size of 4.76mm (3/16″). approx lenght 105mm Note there is no tail piece included but a separate tail piece, nut and washer are offered as additional options.
Made from steel. 17cm Deep – 17cm Wide – 30cm High. Includes Vecro Straps.
Replacement silicone Tri-Clamp Gasket, suitable for all standard tri-clamp fittings. Colour may vary.
Splicer / Pipe Joiner for your keg dispensing system. These simple draft beer parts can extend or repair your beer and gas line. Made of stainless steel, they’re designed to maintain the inside diameter of your hose. High quality beer dispensing parts like this one are made of stainless steel to ensure that the taste…
This fitting pushes into a 5/16″ or 8mm push fit fitting to reduce from 5/16″ or 8mm to 1/4″.
This ball valve is incredibly handy for those wanting to control the shut off flow of liquid and gas lines on keg couplers or shanks that are 5/8″ thread. Highly recommended if you are disconnecting your coupler and not re-attaching to another keg immediately. 5/8″ Stainless Ball Valve (Female x Male) for Keg Couplers This…
This is a Vinyl 5/8 Washer which is suitable for Keg Couplers and Tap ShanksSpecifications:(10 Pack) 5/8 Vinyl Washer 13mmIDx20mmODx3.7mm
A stainless steel shank for your beer tap, with a bore size of 4.76mm (3/16″). Complete with tail piece, nut and washer
Specifications: 0-15psi / 0-100kPa / 0-1.0 Bar (kg/cm^2) Rubber Coated 8mm Push in BarbThis triple scale gauge is the ideal range to read pressures for pressurised fermentation. The triple scale gauge gives readings in Bar, PSI and kPA so irrespective of what units you prefer this gauge will display what you need. The barb on…
Specificatoins: 0-150psi / 0-1000kPa / 0-10 Bar (kg/cm^2) Rubber Coated 8mm Push in Barb This triple scale gauge is the ideal range to read pressures for pressurised fermentation. The triple scale gauge gives readings in Bar, PSI and kPA so irrespective of what units you prefer this gauge will display what you need. The barb…
Commonly referred to as the “Slide On Coupler” or “German Slider” now with 8mm duotight push in fittings for a faster simpler connection. We highly reccomend using EVABarrier 4mm x 8mm or 5mm x 8mm with duotight fittings. Suitable for attaching Tooheys, Coopers, XXXX and most Craft Breweries kegs.This is also the standard for the…
The Adjustable Sparkler contains a cone pointing toward the end of the tap. This is in the direct path of beer flowing into the glass. The beauty of the adjustment is that you can easily adapt to the agitation of the beer being dispensed. This is done with a quick turn. As you tighten the…
This easy to use and compact spunding valve is handy for keg transfers or pressurized fermentations when you want to limit oxygen exposure and use counter pressure in the keg you are filling into or in the fermenter you are using. This new improved G2 model has several upgrades: 1. duotight fitting where the gauge…
Want to attach a tap directly to a keg? This handy little device is less expensive and makes attaching taps to kegs even easier.